is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to Install Fence Post Caps
1 Post level
2 Tape measure
3 Hammer
4 Screwdriver
5 Power drill
6 Saw
7 Safety glasses
8 Work gloves
9 Post hole digger
10 Concrete mix

How to Install Fence Post Caps

Step-by-Step Guide: Installing Fence Post Caps Made Easy

Installing fence post caps is a great way to add a finishing touch to your fence and protect your posts from the elements. Follow these simple steps to install fence post caps:

Step 1: Measure your posts
Before you begin, measure the width and depth of your fence posts to ensure you purchase the correct size caps.

Step 2: Clean the posts
Clean the top of each post with a damp cloth to remove any dirt or debris. This will ensure the cap adheres properly.

Step 3: Apply adhesive
Apply a small amount of adhesive to the top of each post. Be sure to use an adhesive that is appropriate for the type of material your fence posts are made of.

Step 4: Place the cap
Place the cap onto the adhesive, making sure it is centered and level. Press down firmly to ensure a good bond.

Step 5: Secure the cap
If your caps come with screws or clips, use these to secure the cap to the post. For screw-on caps, drill pilot holes first to prevent splitting the wood.

Step 6: Allow adhesive to dry
Allow the adhesive to dry completely before touching or applying any pressure to the cap.

Step 7: Repeat for all posts
Repeat the process for all of your fence posts, making sure each cap is level and secure.

By following these simple steps, you can easily install fence post caps and protect your fence posts for years to come.